Product Categories
Denmark Belfuse L829-1J1T-JM Compatible LINK-PP LPJT7200A98NL 2.5G Base-T low profile Magjack rj45 Tab Up Orange&Green&Yellow Leds
- Compatible Brands: Belfuse
- Number of Ports: 1X1
- Speed: 2.5GBase-T
- PoE: Non-PoE
- Latch: Up
- Mounting Type: THT
- LED Option: Orange&Green / Yellow
- Shield EMI Tabs: YES
- Temperature: 0℃ to 70℃
- P/N: LPJT7200A98NL
- Manufacturer: LINK-PP
- Compatible Brand: Belfuse
- Compatible P/N: L829-1J1T-JM
Category:
Product Description
Product Specifications
| LINK-PP Part Number | LPJT7200A98NL | Belfuse Part Number | L829-1J1T-JM |
| Part Status | Active | Connector Type | Jack |
| Number of Positions/Contacts | 12p8c (RJ45, Ethernet) | Application-Lan | Ethernet(NON PoE) |
| Number of Ports | 1x1 Port | Speed | 10/100/1000 Base-T |
| Latch | Up | Cores per Port | 8 |
| Orientation | 90° Angle (Right) | PCB Mount Angle | SIDE ENTRY |
| Shield EMI Tabs | With | LED Option | Orange&Green&Yellow |
| PCB | FR4 | PCB Retaining Post | T POST |
| Package Height (Inches/mm) | 0.445/11.30 | Package Length (Inches/mm) | 0.953/24.20 |
| Package Width (Inches/mm) | 0.701/17.80 | Temperature | -40℃ TO 85℃ |
| Bst Circuit | Yes | AutomDX | YES |
| Diodes | No | Contact Mating Area Plating | GOLD 6u"/15u"/30u" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C |
Belfuse L829-1J1T-JM Compatible LINK-PP LPJT7200A98NL 2.5G Low Profile RJ45 Magjack Technical Overview
The LINK-PP LPJT7200A98NL (engineered as a direct 100% pin-to-pin drop-in replacement for Belfuse L829-1J1T-JM) is an industrial-grade single-port (1x1) Tab-Up 12p8c RJ45 Integrated Connector Module (ICM) with an ultra-low profile package height of 11.30mm [.445 in], built-in 2.5GBASE-T Multi-Gigabit magnetics, tri-color Orange/Green/Yellow status LEDs, and EMI shield spring tabs. Compliant with IEEE 802.3bz standards, it integrates an 8-core transformer/choke matrix (1CT:1CT turns ratio) across 4 differential pairs, delivering 2.5 Gbps full-duplex transmission, 1500Vrms isolation, ESD protection, and extended operating temperature reliability from -40°C to +85°C for network firewalls, enterprise servers, and switches.
- 2.5GBASE-T Multi-Gigabit Magnetics Architecture: 12p8c RJ45 connector integrated with an 8-core magnetic matrix (1CT:1CT turns ratio) supporting 2.5 Gbps communication over Cat5e/Cat6 wiring.
- Ultra-Low Profile 11.30mm Package Height: Compact 11.30mm [.445 in] profile saves critical vertical board clearance in 1U rack-mount network firewalls, high-density servers, and switches.
- Tri-Color Diagnostic Status LEDs: 12p8c layout accommodates multi-LED channels (Orange, Green, Yellow), enabling independent visual indication for multi-speed links, duplex states, and activity.
- Direct Cross-Reference Replacement: Fully qualified footprint and electrical drop-in replacement for Belfuse L829-1J1T-JM for BOM cost optimization and secondary sourcing.
LINK-PP LPJT7200A98NL 2.5G Multi-Gigabit RJ45 Magjack Connector Overview
LINK-PP LPJT7200A98NL is a right-angle side-entry 1x1 Tab-Up 12p8c RJ45 integrated connector module (ICM) designed for non-PoE 2.5G Multi-Gigabit Ethernet platforms. Housing signal transformers, common-mode chokes, tri-color (Orange/Green/Yellow) status LEDs, and Bob Smith Termination directly inside a metal-shielded jack with EMI spring tabs, this connector simplifies motherboard layout by replacing discrete PHY magnetics. It serves as a fully qualified, pin-compatible secondary-source alternative to Belfuse L829-1J1T-JM in 1U network firewalls, enterprise servers, commercial intercoms, and industrial gateways.
Key Benefits of LINK-PP LPJT7200A98NL / Belfuse L829-1J1T-JM Compatible Magjack
- Multi-Gigabit 2.5GBASE-T Speed (IEEE 802.3bz): Embeds an 8-core transformer and common-mode choke matrix that isolates and filters 4 differential pairs, ensuring clean 2.5 Gbps eye diagrams with low insertion loss up to 125 MHz Nyquist frequency.
- Ultra-Low Profile 11.30mm Package Height: Significantly lowers vertical connector height compared to traditional 13.45mm/16.90mm Magjacks, making it ideal for thin-profile 1U network firewalls and dense server motherboards.
- Tri-Color Orange, Green & Yellow Diagnostic LEDs: Integrated multi-LED channels provide flexible visual indication for 10/100/1000/2.5G link speeds and data traffic activity on network security appliances.
- EMI Shield Tabs for Enhanced Panel Grounding: Outfitted with external EMI spring tabs on the metal shield frame that press tightly against chassis front panel cutouts, forming a low-impedance grounding loop to suppress radiated emissions.
- Industrial Operating Temperature Range (-40°C to +85°C): Constructed with high-grade FR4 substrate and durable housing to withstand severe thermal fluctuations in unconditioned outdoor equipment and telecom racks.
- Direct Second Sourcing for Belfuse L829-1J1T-JM: Identical 12p8c through-hole PCB land pattern and pinout allow seamless drop-in secondary sourcing to reduce procurement lead times.
Integrated Magnetics & 2.5GBASE-T Signal Architecture
The LINK-PP LPJT7200A98NL utilizes an advanced 2.5G Multi-Gigabit Integrated Connector Module (ICM) architecture that embeds 2.5GBASE-T magnetics directly behind the 12p8c contact pins, eliminating high-frequency noise radiation caused by long trace runs on the motherboard.
8-Core Multi-Gigabit Transformer & Choke Configuration
Featuring a 1CT:1CT transmit and receive turns ratio with 8 magnetic cores per port, the LPJT7200A98NL establishes 1500Vrms galvanic isolation between the 2.5G Ethernet PHY transceiver chip and the external network cable. The 8-core layout provides precise impedance matching across all 4 differential pairs required for 2.5GBASE-T, suppressing inter-pair crosstalk and common-mode noise.
Bob Smith Termination (BST) & ESD Rejection
The integrated Bob Smith Termination (BST) network utilizes high-voltage capacitors and precision resistors to balance line impedance on unused cable pairs. This prevents common-mode noise reflection, reduces radiated EMI emissions, and enhances system ESD immunity during cable plugging.
PCB Mounting & Mechanical Specifications
Designed for automated Through-Hole Technology (THT) assembly, the LPJT7200A98NL incorporates robust mechanical features to ensure structural integrity on FR4 substrates.
11.30mm Ultra-Low Profile Height & 12p8c Layout
With package dimensions of 11.30mm H x 24.20mm L x 17.80mm W, the LPJT7200A98NL provides an ultra-low vertical footprint. The 12p8c through-hole layout accommodates dedicated LED pins for tri-color indication, while T-Post mechanical pegs anchor the housing firmly to the motherboard during cable plugging.
Target Applications: Network Firewalls, Enterprise Servers, and Intercoms
Combining IEEE 802.3bz 2.5G speed, 11.30mm ultra-low profile height, BST noise suppression, EMI shield tabs, and Belfuse L829-1J1T-JM compatibility, the LINK-PP LPJT7200A98NL supports diverse embedded systems:
- Network Firewalls & Security Appliances: Ideal for 1U rack-mount firewalls, SD-WAN security appliances, and enterprise VPN gateways requiring 2.5G multi-gigabit uplinks.
- Enterprise 2.5G Servers & Blade Modules: Deployed in high-density rack servers, blade systems, and cloud storage controllers.
- Commercial Intercoms & Industrial Gateways: Suitable for multi-channel IP intercom consoles, Wi-Fi 6 access points, and industrial automation gateways.
How to Select and Verify LPJT7200A98NL vs. Belfuse L829-1J1T-JM
Hardware design engineers and procurement specialists evaluating the LINK-PP LPJT7200A98NL as a second-source replacement for Belfuse L829-1J1T-JM should verify the following core parameters:
- 2.5GBASE-T Magnetics Compatibility: Confirm that an 8-core magnetic matrix (4 differential pairs) and a 1CT:1CT turns ratio match your 2.5G Ethernet PHY transceiver reference design.
- 11.30mm Package Height Clearance: Verify that the 11.30mm [.445 in] ultra-low package height fits within your 1U network firewall bezel window.
- 12p8c THT Pinout & LED Driving Polarity: Confirm that the 12-pin through-hole land pattern and Orange/Green/Yellow LED driving circuitry match the Belfuse L829-1J1T-JM PCB Gerber layout.
- Operating Temperature Requirements: Confirm that the -40°C to +85°C industrial temperature envelope satisfies your product's environmental specification.
Frequently Asked Questions
Is LINK-PP LPJT7200A98NL compatible with Belfuse L829-1J1T-JM?
Yes. LINK-PP LPJT7200A98NL is a direct functional, electrical, and footprint drop-in replacement for Belfuse L829-1J1T-JM, featuring the same 1x1 Tab-Up 2.5GBASE-T Magjack layout, 11.30mm package height, and Orange/Green/Yellow LEDs.
Does LINK-PP LPJT7200A98NL support 2.5GBASE-T Multi-Gigabit Ethernet?
Yes. LPJT7200A98NL is equipped with an 8-core multi-gigabit magnetic matrix supporting 2.5G Base-T data rates compliant with IEEE 802.3bz standards over Cat5e or Cat6 cabling.
What is the package height of LPJT7200A98NL?
LPJT7200A98NL features an ultra-low profile package height of 11.30mm (0.445 inches), making it significantly thinner than standard 13.45mm or 16.90mm Magjacks.
What LED options are available on LPJT7200A98NL?
LPJT7200A98NL features integrated tri-color Orange & Green & Yellow LEDs, driven via a 12-pin (12p8c) layout to provide flexible multi-speed link and activity diagnostics.
What is the operating temperature range of LPJT7200A98NL?
LINK-PP LPJT7200A98NL is rated for an industrial operating temperature range of -40°C to +85°C (-40°F to +185°F), making it suitable for unconditioned outdoor equipment and telecom racks.
Is LPJT7200A98NL a Power over Ethernet (PoE) connector?
No. LPJT7200A98NL is a Non-PoE 2.5G Multi-Gigabit RJ45 Magjack designed strictly for signal transmission and isolation without DC power delivery.
Download
Product Drawing
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications



























