Product Categories
Costa-Rica LPJT245125BENL 2.5G Base-T RJ45 1x2 Port POE+ Mag jacks Tab Down Green/Yellow Leds
- Compatible Brands: LINK-PP
- Number of Ports: 1X2
- Speed: 2.5GBase-T
- PoE: PoE+
- Latch: Down
- Mounting Type: THT
- LED Option: Green / Yellow
- Shield EMI Tabs: NO
- Temperature: 0℃ to 70℃
- P/N: LPJT245125BENL
- Manufacturer: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: LPJT245125BENL
Category:
Product Description
Product Specifications
| LINK-PP Part Number | LPJT245125BENL | Connector Type | Jack |
| Part Status | Active | Mounting Type | Through Hole |
| Latch | Down | Application-Lan | Ethernet(PoE+) |
| Number of Ports | 1x2 Port | Speed | 2.5G Base-T |
| Orientation | 90° Angle (Right) | PCB Mount Angle | SIDE ENTRY |
| Shield EMI Tabs | Without | LED Option | Green/Yellow |
| Package Height (Inches/mm) | 0.527/13.39 | Package Length (Inches/mm) | 0.839/21.30 |
| Package Width (Inches/mm) | 1.213/30.80 | ||
| PCB | FR4 | Temperature | 0℃ TO 70℃ |
| Bst Circuit | Yes | AutomDX | YES |
| Diodes | No | Contact Mating Area Plating | GOLD 6u"/15u"/30u" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C |
LINK-PP LPJT245125BENL 2.5G Base-T RJ45 1x2 Port POE+ Mag jacks for Network Firewall and SMPS (Tab Up, Green/Yellow Leds)
Product Overview & Applications
The LINK-PP LPJT245125BENL is a commercial-grade 2.5G Base-T RJ45 Integrated Connector Module (ICM). Featuring a 1x2 dual-port configuration alongside PoE+ capabilities, this RJ45 MagJack provides Multi-Gigabit Ethernet connectivity suitable for multi-port embedded networking equipment, including network firewalls, industrial PCs, smart intercom hubs, and Switched-Mode Power Supplies (SMPS).
Electrical Specifications & Signal Integrity
Designed to support Multi-Gigabit network throughput, the internal magnetics are optimized for 2.5GBASE-T differential signaling. This module supports Power over Ethernet Plus (PoE+), conforming to IEEE 802.3at standards to deliver both high-speed data and power over twisted-pair copper cabling. The 1CT:1CT transformer ratio provides balanced impedance matching, working in conjunction with the integrated isolation transformer to support the Ethernet isolation requirements defined by IEEE 802.3. Additionally, Auto-MDIX compatibility automatically detects MDI/MDIX cable configurations for standard network deployments.
Mechanical Architecture & PCB Integration
The 1x2 port (side-by-side) architecture consolidates two RJ45 interfaces into a single housing, optimizing horizontal PCB real estate compared to discrete single-port deployments. Integrating the magnetics directly within the connector helps reduce PCB routing complexity between the multi-port Ethernet PHY and the integrated transformer. The module utilizes a Tab Down latch orientation and a side-entry (90° right angle) through-hole design to support mechanical stability during assembly. Configured without external shield EMI tabs, this specific shielding variant supports isolated panel mounting or customized chassis grounding schemes as dictated by the host system design.
Environmental & Visual Diagnostics
The LPJT245125BENL is rated for commercial operating environments ranging from 0°C to +70°C. Integrated dual-color LEDs (Green/Yellow) provide visual Ethernet status indication, with specific LED behavior determined by the host PHY configuration and system design. To meet varying lifecycle and mating requirements, the contact mating area is available with customizable 6μ", 15μ", or 30μ" gold plating options.
OEM Supply & Integration Summary
By combining a 1x2 dual-port footprint, 2.5G Multi-Gigabit speeds, and IEEE 802.3at PoE+ integration, the LPJT245125BENL offers a standardized RJ45 with integrated magnetics solution for OEM manufacturers developing high-throughput, power-enabled network appliances.
Download
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications



























