Product Categories
Costa-Rica LPJG17331CNL 100/1000 Base-T Modular jack RJ45 With Transformer Tab Up Without Led
- Compatible Brands: LINK-PP
- Number of Ports: 1X1
- Speed: 1000Base-T
- PoE: Non-PoE
- Latch: Up
- Mounting Type: THT
- LED Option: No LEDs
- Shield EMI Tabs: YES
- Temperature: -40℃ to +85°C
- P/N: LPJG17331CNL
- Manufacturer: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: LPJG17331CNL
Category:
Product Description
Product Specifications
| LINK-PP Part Number: | LPJG17331CNL | Connector Type | Jack |
| Part Status | Active | Mounting Type | Through Hole |
| Number of Positions/Contacts | 10P8C (RJ45, Ethernet) | Application-LAN | Ethernet (Non-PoE) |
| Number of Ports | 1x1 Port | Speed | 100/1000BASE-T |
| Latch | Up | Cores per Port | 8 |
| Orientation | 90° Angle (Right) | PCB Mount Angle | Side Entry |
| Shield EMI Tabs | With | LED Option | Without |
| PCB | FR4 | PCB Retaining Post | T-Post |
| Package Height (Inches/mm) | 0.530 / 13.45 | Package Length (Inches/mm) | 0.994 / 25.25 |
| Package Width (Inches/mm) | 0.636 / 16.15 | Temperature | -40°C to +85°C |
| BST Circuit | Yes | AutoMDX | Yes |
| Diodes | No | Contact Mating Area Plating | Gold 6µ" / 15µ" / 30µ" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T, C |
Single-Port 100/1000BASE-T Industrial RJ45 MagJack
The LINK-PP LPJG17331CNL is an industrial-grade single-port 100/1000BASE-T Ethernet RJ45 MagJack in a right-angle, side-entry through-hole configuration. The Ethernet interface incorporates an internal 8-core magnetic structure with a 1CT:1CT turns ratio and T, C configuration. The connector also includes Bob Smith termination (BST), AutoMDX support, an unilluminated (LED-free) front face, and a specified operating temperature range of -40°C to +85°C.
The mechanical package features a housing height of 13.45 mm (0.530 inches), a length of 25.25 mm (0.994 inches), and a width of 16.15 mm (0.636 inches). Designed with a 10P8C configuration, Tab-Up latch orientation, perimeter shield EMI tabs, and molded T-Posts for PCB retention, the LPJG17331CNL provides a compact board-level Ethernet interface for solar inverters, digital video recorders, commercial media players, set-top boxes, and intercom systems.
Design Positioning and Qualification
The LPJG17331CNL is designed as an integrated RJ45 MagJack for hardware platforms requiring through-hole PCB termination, 100/1000BASE-T Ethernet data rates, and an industrial -40°C to +85°C operating temperature range. It can be evaluated for new hardware designs, BOM consolidation, or as an alternative sourcing option for existing 10P8C 100/1000BASE-T Tab-Up designs using comparable mechanical and electrical requirements. Engineering teams should verify pinout mapping, PCB land patterns, and mechanical clearances against the official LINK-PP technical drawing before approving production release.
Procurement and OEM Qualification
For procurement teams, sourcing specialists, and OEM hardware programs evaluating the LPJG17331CNL, qualification activities typically center on BOM qualification, second-source risk mitigation, and production readiness. LINK-PP can support design qualification through mechanical drawing review, sample evaluation, and technical documentation required for prototype validation, approved vendor list (AVL) entry, and volume production planning. Sourcing teams should verify lead-time requirements, applicable packaging requirements, and contact plating selection (6µ", 15µ", or 30µ") based on project lifecycle demands.
Tab-Up Latch Topology and Enclosure Front-Panel Optimization
Integrating 100/1000BASE-T magnetics into a Tab-Up RJ45 connector assembly provides practical packaging and mechanical layout considerations for embedded hardware:
- Tab-Up Latch Orientation: The RJ45 plug release latch is positioned on the upper side of the port, which can improve release-tab accessibility in board-edge layouts when sufficient enclosure clearance is provided.
- 13.45 mm Vertical Height: The 13.45 mm (0.530 inches) housing height supports space-constrained board-edge and embedded hardware designs where enclosure clearance is limited.
- -40°C to +85°C Operating Range: The specified temperature range supports hardware designs requiring operation across wider ambient temperature conditions. Final system qualification should also consider enclosure, humidity, airflow, and environmental protection requirements.
- Unilluminated Front Face: The LPJG17331CNL is specified without integrated status LEDs, making it suitable for systems that use separate board-level or front-panel status indicators.
- EMI Tabs & T-Post Retention: The metal shield includes perimeter EMI tabs designed for system-level chassis contact, while molded T-Post features help locate and mechanically retain the connector on the host PCB.
Internal Magnetics Architecture, 100/1000BASE-T Signaling, and AutoMDX
The Ethernet port incorporates an internal 8-core magnetic structure with a 1CT:1CT turns ratio and T, C configuration. The integrated magnetics provide the electrical interface between the Ethernet PHY and the cable-side RJ45 connection while reducing the need for separate discrete magnetic components on the host board.
The connector includes a Bob Smith termination (BST) circuit and is specified for Ethernet interfaces supporting AutoMDX operation. Hardware designers should evaluate the MagJack together with the selected PHY reference design, differential-pair routing, PCB grounding, and system-level EMC requirements. The LPJG17331CNL is specified for non-PoE Ethernet applications.
Mechanical Envelope and PCB Layout Considerations
When integrating the LPJG17331CNL into host hardware layouts, engineering teams should observe the following structural and layout parameters:
1. Package Dimensions and Front-Panel Cutout
The connector body measures 13.45 mm (0.530 inches) in height, 25.25 mm (0.994 inches) in length, and 16.15 mm (0.636 inches) in width. Front-panel openings should provide appropriate clearance for the connector shield profile, EMI tabs, and cable plug access.
2. Tab-Up Latch Headroom and Servicing
Because the release latch is oriented on the top face, designers should provide adequate vertical clearance above the connector port to ensure field technicians can access the plug latch during servicing.
3. 10P8C Footprint and PCB Layout
The connector utilizes a 10P8C through-hole pin arrangement accommodating 100/1000BASE-T differential pairs. Designers should follow the manufacturer's recommended copper keep-out and clearance requirements on the host PCB to support signal integrity and electrical isolation.
4. Shield and EMI Tab Integration
The connector incorporates a metal shield with perimeter EMI tabs. System designers should evaluate shield-tab contact, PCB shield connections, enclosure geometry, and chassis-ground strategy as part of the complete system-level EMC design.
Design Consideration Comparison: Integrated MagJack vs. Discrete Solution
| Design Consideration | LPJG17331CNL Integrated Tab-Up MagJack |
Discrete Gigabit Magnetics + Modular RJ45 Jack |
|---|---|---|
| Component Integration | Magnetics and RJ45 connector integrated in one housing | Separate magnetic transformer and modular RJ45 jack |
| PCB Assembly | Single integrated connector assembly | Multiple placements (SMD transformer + through-hole jack) |
| Connector Selection | Integrated RJ45 port geometry | Flexible external connector selection |
| Board-Edge Layout | Consolidated footprint at board edge | Requires trace routing between discrete magnetics and connector |
| Vertical Height Envelope | Fixed 13.45 mm profile | Model-dependent |
| Front-Panel Shielding | Integrated metal shield with perimeter EMI tabs | Dependent on chosen external RJ45 shield design |
| Primary Engineering Focus | Consolidated 100/1000BASE-T interface and integrated connector architecture | Independent single-port placement and routing flexibility, depending on selected model |
Application Considerations for LPJG17331CNL
| Target Application Profile | Primary Engineering Consideration |
|---|---|
| Solar Inverters & Renewable Energy | The -40°C to +85°C operating range supports hardware designs exposed to wider temperature conditions; final system environmental qualification remains application-dependent. |
| Digital Video Recorders & Media Players | Integrated 100/1000BASE-T magnetics provide a compact Ethernet physical interface for network-enabled video and media hardware. |
| Commercial Set-Top Boxes & Smart Displays | Unilluminated front face provides a clean aesthetic where external status LEDs are handled via separate front-panel displays. |
| Intercom Systems & Security Gateways | Tab-Up latch orientation supports board-edge connector layouts, while perimeter shield tabs can be incorporated into the system-level chassis and EMC design. |
Engineering Verification Checklist
Before releasing a PCB layout or finalizing a bill of materials using the LPJG17331CNL, hardware engineers should confirm the following design parameters against official documentation:
- Footprint and Pinout Verification: Verify 10P8C pinout, T-Post drill sizes, and shield pin locations against the official LINK-PP LPJG17331CNL drawing.
- Tab-Up Headroom Clearance: Confirm that the enclosure cutout provides sufficient vertical clearance above the port for cable plug latch engagement and release.
- Unilluminated Configuration: Confirm that the schematic symbol and PCB footprint match the LED-free LPJG17331CNL configuration shown in the official product drawing.
- Shield and Chassis Grounding: Verify the connector shield-pin and EMI-tab implementation against the host system grounding and EMC design requirements.
- PHY Magnetics Compatibility: Confirm that the 1CT:1CT turns ratio and BST termination topology align with the transceiver manufacturer's reference schematic.
- Thermal Environment: Ensure that the operating environment inside the equipment chassis remains within the specified -40°C to +85°C industrial temperature range.
Frequently Asked Questions
What are the primary specifications of the LINK-PP LPJG17331CNL?
The LPJG17331CNL is an industrial-grade single-port 100/1000BASE-T non-PoE Ethernet RJ45 MagJack. It features a 10P8C configuration, 8-core integrated magnetics per port, a 1CT:1CT turns ratio, Tab-Up latch orientation, side-entry through-hole mounting, an unilluminated design, a metal shield with EMI tabs, an integrated BST circuit, AutoMDX support, and a specified operating temperature range of -40°C to +85°C.
Can the LPJG17331CNL be evaluated as an alternative sourcing option in existing designs?
Yes. The LPJG17331CNL can be evaluated as an alternative sourcing option for 10P8C 100/1000BASE-T Tab-Up RJ45 MagJack designs with comparable mechanical and electrical requirements. Engineering teams should cross-reference pinout mapping, package dimensions (13.45 mm height, 25.25 mm length, 16.15 mm width), electrical characteristics, and mechanical clearances against official manufacturer drawings before approving component substitution.
What is the significance of the -40°C to +85°C operating temperature range?
The -40°C to +85°C specification defines the stated operating temperature range of the LPJG17331CNL. This makes the connector relevant to hardware platforms requiring wider temperature operation. Final system qualification should also consider the enclosure, PCB, PHY, humidity, airflow, and other environmental conditions.
What does the unilluminated (LED-free) configuration mean?
The LPJG17331CNL is specified without integrated status LEDs in the RJ45 connector housing. This configuration can be considered for equipment that uses separate board-level or front-panel indicators. Engineers should refer to the official product drawing and schematic to verify the connector pin configuration and PCB footprint.
What is the function of the internal 8-core magnetics architecture?
The LPJG17331CNL specifies an 8-core integrated magnetic structure for its 100/1000BASE-T Ethernet interface, with a 1CT:1CT turns ratio and T, C configuration. The integrated magnetics provide the electrical interface between the Ethernet PHY and the cable-side RJ45 connection. Engineers should refer to the applicable LINK-PP schematic and electrical documentation for the exact magnetic topology and termination arrangement.
Does the LPJG17331CNL support Power over Ethernet (PoE)?
No. The LPJG17331CNL is specified for non-PoE Ethernet data interfaces. For applications requiring PoE power delivery, a connector and magnetics solution specifically rated for the required IEEE 802.3 PoE standard and DC current conditions should be selected.
Download
Product Drawing
3D Model
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications



























