HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open

Product Categories


Costa-Rica Wurth 7499111217 Compatible LPJG17331CNL 100/1000 Base-T Modular jack RJ45 With Transformer Tab Up Without Led

LINK-PP LPJG17331CNL is a 100/1000 Base-T RJ45 connector with integrated magnetics, Tab Up latch and no integrated LEDs.
  • Compatible Brands: Wurth
  • Number of Ports: 1X1
  • Speed: 1000Base-T,100Base-TX
  • PoE: Non-PoE
  • Latch: Up
  • Mounting Type: THT
  • LED Option: No LEDs
  • Shield EMI Tabs: YES
  • Temperature: -40℃ to +85°C
  • P/N: LPJG17331CNL
  • Manufacturer: LINK-PP
  • Compatible Brand: Wurth
  • Compatible P/N: 7499111217

Product Description

Product Specifications

LINK-PP Part Number LPJG17331CNL Wurth Part Number 7499111217
Part Status Active Connector Type Jack
Number of Positions/Contacts 10p8c (RJ45, Ethernet) Application-Lan Ethernet(Non-PoE)
Number of Ports 1x1 Port Speed 100/1000 Base-T
Latch Up Cores per Port 8
Orientation 90° Angle (Right) PCB Mount Angle SIDE ENTRY
Shield EMI Tabs With LED Option Without
PCB FR4 PCB Retaining Post T POST
Package Height (Inches/mm) 0.530/13.45 Package Length (Inches/mm) 0.994/25.25
Package Width (Inches/mm) 0.636/16.15 Temperature -40 TO +85℃
Bst Circuit YES AutomDX YES
Diodes No Contact Mating Area Plating GOLD 6u"/15u"/30u"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C

Product Engineering Overview

LINK-PP LPJG17331CNL combines a single 100/1000 Base-T RJ45 opening with integrated magnetics in a side-entry PCB-mounted assembly. The product record lists a Tab Up latch and no integrated LEDs.

The record specifies Non-PoE operation and an operating range of −40°C to +85°C. Its listed body dimensions are 16.15 × 25.25 × 13.45 mm; check the board and enclosure together when arranging the connector.

Part: LPJG17331CNL
Interface: 100/1000 Base-T
Ports: 1×1
Mounting: PCB mount, Tab Up
Temperature: −40°C to +85°C
Power: Non-PoE

Compatibility and Design Positioning

The existing record positions LPJG17331CNL as a cross-reference and alternative sourcing option for Wurth 7499111217. Compare both official drawings, magnetic characteristics, footprint, LED pins and panel geometry before qualifying a substitution; the listing alone does not prove interchangeability.

Procurement and OEM Qualification

Specify LPJG17331CNL and the applicable drawing revision when requesting samples. Confirm plating, packaging and availability before AVL approval, then validate the connector on the production PCB and in the intended enclosure.

Topology and Physical Packaging

  • Interface: One 8P8C RJ45 port with integrated magnetics.
  • Mounting: PCB-mounted side-entry assembly.
  • Latch: Tab Up; check access after enclosure assembly.
  • Indicators: no integrated LEDs.
  • Envelope: The record lists 16.15 × 25.25 × 13.45 mm; check the applicable drawing and tolerances.

Magnetics and Electrical Interface

The product table lists a 1CT:1CT turns ratio for RX/TX and specifies Ethernet interfaces supporting AutoMDX operation. Match the applicable pinout and center taps to the selected PHY, and confirm isolation and other electrical requirements in the product documentation.

Mechanical Envelope and PCB Layout Considerations

  • Access: Allow plug insertion and latch-release clearance at the board edge.
  • Footprint: Match signal, shield and retaining holes to the applicable drawing.
  • Shield: Review shield and PCB clearance requirements in the host grounding design.
  • Indicators: The product record specifies no integrated LEDs. Provide external indicators if the host equipment requires them.

Design Consideration Comparison

Architecture Engineering consideration
Integrated magnetics RJ45 The selected connector determines the combined board footprint and magnetic pinout.
Discrete connector and magnetics Component placement and routing depend on the selected connector, transformer and PHY.

Application Considerations

Target Application Profile Primary Engineering Consideration
10/100 Ethernet equipment Verify PHY compatibility, signal routing and the board footprint.
Enclosed network equipment Check shield connection, plug access and connector clearance.

Engineering Verification Checklist

  1. Compare the PHY interface and transformer pinout with the applicable schematic.
  2. Check the complete board footprint and board fabrication tolerances.
  3. Verify shield and retaining-post connections.
  4. Test mating and latch access in the finished enclosure.
  5. Verify whether separate status indicators are needed.
  6. Validate isolation, signal integrity and temperature in the assembled system.

Frequently Asked Questions

Which Ethernet speeds are listed for LPJG17331CNL?

The existing product record specifies 100/1000 Base-T. Available link modes depend on the host PHY and system configuration.

Can LPJG17331CNL replace Wurth 7499111217?

The existing record positions LPJG17331CNL as a cross-reference and alternative sourcing option for Wurth 7499111217. Compare both official drawings, magnetic characteristics, footprint, LED pins and panel geometry before qualifying a substitution; the listing alone does not prove interchangeability.

What does the side-entry orientation mean for the layout?

Allow plug insertion and latch-release clearance at the board edge. Check the entire footprint and mechanical tolerances against the applicable drawing.

What is the listed component operating range?

The product record lists −40°C to +85°C. Assess the finished system separately.

Does the connector contain status LEDs?

The product record specifies no integrated LEDs. Provide external indicators if the host equipment requires them.

Does LPJG17331CNL support PoE?

The product record specifies Non-PoE. Select a connector and magnetics rated for the required PoE standard when power over Ethernet is needed.

Download