Product Categories
Costa-Rica X Multiple XMH-2116D3018 Compatible LINK-PP LPJG17610AANL 10/1000 Base-T Yellow/Green Led Tab Up 2x1 Port Stacked RJ-45 Connector
- Compatible Brands: X Multiple
- Number of Ports: 2X1
- Speed: 10Base-T,100Base-TX,1000Base-T
- PoE: Non-PoE
- Latch: Both
- LED Option: Yellow / Green
- Shield EMI Tabs: YES
- Temperature: -40℃ to +85°C
- P/N: LPJG17610AANL
- Manufacturer: LINK-PP
- Compatible Brand: X Multiple
- Compatible P/N: XMH-2116D3018
Category:
Product Description
Product Specifications
| LINK-PP Part Number: | LPJG17610AANL | X Multiple Part Number | XMH-2116D3018 |
| Part Status | Active | Connector Type | Jack |
| Number of Positions/Contacts | 8p8c (RJ45, Ethernet) | Application-Lan | Ethernet(NoN PoE) |
| Number of Ports | 2x1 Port | Speed | 10/100/1000 Base-T |
| Latch | Both | Cores per Port | 8 |
| Orientation | 90° Angle (Right) | PCB Mount Angle | SIDE ENTRY |
| Shield EMI Tabs | With | LED Option | Yellow/Green Led |
| PCB | FR4 | PCB Retaining Post | T POST |
| Package Height (Inches/mm) | 1.014/25.75 | Package Length (Inches/mm) | 1.117/28.37 |
| Package Width (Inches/mm) | 0.681/17.30 | Temperature | -40℃ TO +85℃ |
| Bst Circuit | Yes | AutomDX | YES |
| Diodes | No | Contact Mating Area Plating | GOLD 6u"/15u"/30u" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C |
LINK-PP LPJG17610AANL Technical & Compatibility Overview
The LINK-PP LPJG17610AANL is a stacked dual-port (2x1) RJ45 Integrated Connector Module (ICM) with built-in 10/100/1000BASE-T Gigabit Ethernet magnetics and integrated Yellow/Green status LEDs on each port. Engineered as a functional and footprint-compatible alternative to the X Multiple XMH-2116D3018, it incorporates an 8-core magnetic assembly per port (1CT:1CT turns ratio), a Bob Smith Termination (BST) circuit, an extended industrial temperature rating of -40°C to +85°C, and a metal shield equipped with external EMI spring tabs for multi-port panel grounding across industrial PCs, fieldbus systems, digital cameras, and network firewalls.
- Footprint & Schematic Alignment: Designed for footprint and pinout compatibility with X Multiple XMH-2116D3018, supporting direct board-level evaluation and secondary sourcing.
- Stacked 2x1 Dual-Port Architecture: Vertically consolidates two 10/100/1000BASE-T RJ45 ports into a single 17.30mm-wide housing to double front-panel port density.
- Industrial Operating Temperature (-40°C to +85°C): Fully rated for harsh environmental conditions, unconditioned industrial cabinets, and outdoor fieldbus modules.
- Metal Shielding With EMI Spring Tabs: External EMI spring tabs establish multi-point grounding contact with chassis panel cutouts to attenuate electromagnetic radiation.
Key Design Benefits
- Stacked Multi-Port Density: Vertical 2x1 layout doubles Gigabit Ethernet port capacity along motherboard edges, saving horizontal PCB width in high-density networking hardware.
- Extended Industrial Thermal Range: Operates reliably across -40°C to +85°C, making it suitable for industrial PCs, fieldbus gateways, and outdoor security firewalls.
- Integrated Chassis EMI Grounding: External EMI spring tabs ensure grounding continuity against the enclosure panel cutout, helping suppress radiated EMI.
- Integrated Status Diagnostics: Embedded Yellow and Green LEDs enable direct visual link and activity diagnostics without requiring separate board-mounted light pipes.
- Second-Source Supply Continuity: Offers hardware engineering and procurement teams a pin-compatible alternative to mitigate component lead times and supply chain single-point risks.
Integrated Magnetics & Electrical Architecture
The LPJG17610AANL integrates 10/100/1000BASE-T Gigabit magnetics directly behind the contact pins for both ports, reducing the need for long differential trace runs to discrete magnetics on the motherboard.
8-Core Gigabit Transformer Matrix
The integrated magnetic assembly utilizes an 8-core topology per port across all 4 differential pairs with a 1CT:1CT turns ratio. This structure provides galvanic isolation between network cabling and host Gigabit Ethernet PHY transceivers while filtering common-mode noise across Gigabit frequencies.
Bob Smith Termination (BST) Circuitry
Integrated 75-ohm termination networks connect transformer center taps to ground, providing defined common-mode noise suppression across both ports.
Mechanical Specifications & PCB Layout
The LPJG17610AANL features stacked package dimensions of 25.75mm (H) x 17.30mm (W) x 28.37mm (L) [1.014 x 0.681 x 1.117 in]. The stacked 2x1 90-degree right-angle side-entry profile aligns with standard dual-port vertical chassis cutouts. Mechanical stability on FR4 substrates is reinforced by solderable T-Post PCB pegs, which absorb mechanical stress during dual-cable mating.
Target Applications
- Industrial PCs & Fieldbus Systems: High-density 2-port 1 Gbps Ethernet interface for factory automation mainboards and fieldbus communication cards.
- Network Firewalls & Security Gateways: Extended-temperature (-40°C to +85°C) Gigabit networking for enterprise security appliances and industrial routers.
- Digital Cameras & Vision Hardware: High-throughput 10/100/1000 Mbps Ethernet interface for multi-channel video recording and machine vision terminals.
X Multiple XMH-2116D3018 Replacement Compatibility Checklist
When evaluating the LINK-PP LPJG17610AANL as an alternative to X Multiple XMH-2116D3018, hardware engineers should verify the following parameters against their system specification:
- Schematic & Magnetics Alignment: Confirm that your Gigabit Ethernet PHY reference design utilizes an 8-core (4-pair) 1CT:1CT magnetic architecture per port.
- 2x1 Stacked Panel Clearance: Ensure your chassis front-panel cutout matches the 25.75mm height and 17.30mm width of the stacked housing.
- Thermal Class Verification: Confirm that the -40°C to +85°C industrial operating temperature meets or exceeds your operating environment requirements.
- Shield EMI Tab Requirement: Verify that your multi-port bezel cutout requires external EMI spring tabs for chassis grounding contact.
Frequently Asked Questions
Is LINK-PP LPJG17610AANL a pin-compatible alternative for X Multiple XMH-2116D3018 in 10/100/1000BASE-T designs?
Yes. The LPJG17610AANL is engineered with matching 2x1 stacked THT pin spacing, 8-core 1CT:1CT Gigabit magnetics configuration per port, Yellow/Green LEDs, external EMI spring tabs, -40°C to +85°C industrial temperature rating, and 25.75mm package height to serve as a functional drop-in footprint alternative for X Multiple XMH-2116D3018.
What is the advantage of a 2x1 stacked RJ45 MagJack like the LPJG17610AANL?
A 2x1 stacked RJ45 MagJack vertically integrates two Gigabit Ethernet ports into a single 17.30mm-wide housing, saving horizontal PCB width, reducing SMT assembly placement cycles, and simplifying front-panel cutout alignment.
What CAD and engineering validation assets are available for X Multiple XMH-2116D3018 cross-reference checking?
LINK-PP provides complete design-in support assets, including 3D STEP models for mechanical enclosure clearance, 2D dimensional CAD drawings, PCB footprint land patterns for EDA software (Altium, Cadence, KiCad), and product specification sheets.
How can procurement and engineering teams request samples or a quotation for LPJG17610AANL as an alternative to X Multiple XMH-2116D3018?
Procurement and engineering teams can contact LINK-PP to request LPJG17610AANL evaluation samples for mechanical, electrical, and PCB compatibility verification. After qualification, our technical sales team can provide competitive pricing, production lead-time estimates, MOQ terms, and volume-order support for replacing X Multiple XMH-2116D3018.
Download
Product Drawing
3D Model
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications



























