HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open

Product Categories


Costa-Rica LPJM67461AHNL 2.5G Base-T 2x6 Port RJ45 Jacks With Transformer Green/Yellow LED

LINK-PP LPJM67461AHNL is a 2.5GBASE-T 2×6 RJ45 jack with integrated magnetics, side entry with Green/Yellow.
  • Compatible Brands: LINK-PP
  • Number of Ports: 2X6
  • Speed: 2.5GBase-T
  • PoE: Non-PoE
  • Latch: Both
  • Mounting Type: THT
  • LED Option: Green / Yellow
  • Shield EMI Tabs: YES
  • Temperature: -40℃ to +85°C
  • P/N: LPJM67461AHNL
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: LPJM67461AHNL

Product Description

Product Specifications

LINK-PP Part Number: LPJM67461AHNL Connector Type Jack
Part Status Active Mounting Type Through Hole
Number of Positions/Contacts 8p8c (RJ45, Ethernet) Application-Lan Ethernet(Non-PoE)
Number of Ports 2x6 Port Speed 2.5G Base-T
Latch Both Cores per Port 8
Orientation 90° Angle (Right) PCB Mount Angle SIDE ENTRY
Shield EMI Tabs With LED Option Green/Yellow Led
PCB FR4 PCB Retaining Post T POST
Package Height (Inches/mm) 1.008/25.60 Package Length (Inches/mm) 1.130/28.70
Package Width (Inches/mm) 3.430/87.12 Temperature -40℃ TO +85℃
Bst Circuit Yes AutomDX YES
Diodes No Contact Mating Area Plating GOLD 6u"/15u"/30u"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C

Product Engineering Overview

LINK-PP LPJM67461AHNL is a 2×6 2.5GBASE-T RJ45 connector with integrated magnetics. The existing record specifies side entry, latch position Both, Green/Yellow, and Non-PoE operation.

The listed envelope is 28.70 × 87.12 × 25.60 mm (length × width × height), with a component temperature range of −40°C to +85°C. Check the connector pinout and mechanical clearance alongside the PHY interface and enclosure design.

PCB and Electrical Interface

The product table lists a 1CT:1CT RX/TX ratio. Match the signal pins, center taps and shield connections to the applicable schematic and host board layout. The ratio alone does not establish interchangeability.

Selection and Qualification

No third-party equivalent is identified in the existing record; compare the pinout and mechanical outline when evaluating alternatives. Confirm the connector orientation, latch clearance and port arrangement with a sample in the intended assembly.

Frequently Asked Questions

What interface and port arrangement does LPJM67461AHNL have?

The product record specifies 2.5GBASE-T and a 2×6 port arrangement with integrated magnetics.

What should be checked for assembly?

Allow for side-entry cable entry and latch access; compare the PCB footprint and enclosure opening against the applicable mechanical drawing.

Does LPJM67461AHNL support PoE?

The product record identifies it as Non-PoE. Select magnetics rated for the intended power-over-Ethernet application when required.

What is the listed component temperature range?

The product table lists −40°C to +85°C; assess the assembled equipment separately.

Download