HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open

Product Categories


Costa-Rica Pulse JX80-0019NL Compatible LINK-PP LPJ26404AFNL 10/100 Base-T 8p8c Tab Down Green/Green LED 1x2 Port RJ45 Jack

LINK-PP LPJ26404AFNL: 1x2 dual-port 10/100BASE-T RJ45 MagJack, compatible with Pulse JX80-0019NL. Tab-Down, -40°C to +85°C, 21.36mm depth, for NICs & terminals.
  • Compatible Brands: Pulse
  • Number of Ports: 1X1
  • Speed: 10Base-T,100Base-TX
  • PoE: Non-PoE
  • Latch: Down
  • LED Option: Green / Green
  • Shield EMI Tabs: YES
  • Temperature: -40℃ to +85°C
  • P/N: LPJ26404AFNL
  • Manufacturer: LINK-PP
  • Compatible Brand: Pulse
  • Compatible P/N: JX80-0019NL

Product Description

Product Specifications

LINK-PP Part Number LPJ26404AFNL Pulse Part Number JX80-0019NL
Part Status Active Connector Type Jack
Number of Positions/Contacts 8P8C (RJ45, Ethernet) Application-LAN Ethernet (Non-PoE)
Number of Ports 1x2 Port Speed 10/100BASE-T
Latch Down Cores per Port 4
Orientation 90° Angle (Right) PCB Mount Angle Side Entry
Shield EMI Tabs With LED Option Green / Green
PCB FR4 PCB Retaining Post T-Post
Package Height (Inches/mm) 0.536 / 13.61 Package Length (Inches/mm) 0.841 / 21.36
Package Width (Inches/mm) 1.228 / 31.18 Temperature -40°C to +85°C
BST Circuit Yes AutoMDX Yes
Diodes No Contact Mating Area Plating Gold 6µ" / 15µ" / 30µ"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T, C

Pulse JX80-0019NL Compatible Dual-Port 1x2 10/100BASE-T Integrated RJ45 MagJack

The LINK-PP LPJ26404AFNL is a dual-port (1x2) horizontal integrated RJ45 MagJack engineered for 10/100BASE-T Fast Ethernet applications in harsh, wide-temperature non-PoE network architectures. Featuring a Tab-Down (bottom latch) orientation, an ultra-short package length of 21.36 mm (0.841 inches), and an extended operating temperature range of -40°C to +85°C, it combines two 8P8C modular interfaces, integrated 4-core isolation magnetics per port, Bob Smith termination, and Green/Green status LEDs inside a shielded through-hole housing.

The connector features a 90° right-angle, side-entry profile with perimeter EMI grounding tabs, T-Post mechanical PCB retention, and a 31.18 mm overall horizontal width. It is positioned as a compatible alternative to the Pulse JX80-0019NL for network interface cards (NICs), optical network terminals (ONT), industrial webcams, switching power controllers, and embedded computing systems where board depth, dual-port alignment, and upper panel clearances are primary design constraints.

Hardware designers should verify the mechanical drawing, pin assignment, PCB land pattern, and PHY manufacturer interface guidelines against product documentation before releasing PCB layouts for production.

Port Layout: 1x2 Ganged (2 Ports)
Ethernet Speed: 10/100BASE-T Fast Ethernet
Reference Part: Pulse JX80-0019NL
Latch Orientation: Tab-Down (Bottom Latch)
Operating Temperature: -40°C to +85°C Industrial
Shield Configuration: Metal Shield (With EMI Tabs)

Pulse JX80-0019NL Compatible Design Positioning

The LPJ26404AFNL is positioned as a compatible alternative to the Pulse JX80-0019NL for 10/100BASE-T Fast Ethernet applications, providing hardware engineering and procurement teams with a potential second-source option for designs requiring comparable package, footprint, and electrical interface characteristics.

To ensure proper integration on existing or new motherboard designs, engineering teams should cross-reference the mechanical drawing, pin assignment, solder pad geometry, and electrical characteristics against original design requirements prior to volume release.

Horizontal 1x2 Topology and Tab-Down Latch Geometry

Multi-port board layout and enclosure geometry influence connector selection for front-panel Ethernet interfaces:

  • Unified 1x2 Dual-Port Alignment: Solder-mounting a single 1x2 ganged connector ensures consistent port spacing and precise alignment within a single 31.18 mm housing, eliminating cumulative assembly tolerances compared to placing two discrete single-port connectors.
  • Tab-Down Accessibility: In systems where the connector is positioned near the upper edge of an enclosure, under an overhang, or beneath a display bezel, a standard Tab-Up latch can be difficult to reach. The Tab-Down (bottom latch) configuration places the plug release tab on the lower side, ensuring unobstructed cable disengagement.
  • Compact 21.36 mm Package Length: Standard dual-port MagJacks commonly feature package lengths of 25.40 mm or greater. The LPJ26404AFNL's compact 21.36 mm depth frees valuable PCB space directly behind the connector, facilitating shorter trace routing to dual-channel PHY transceivers, decoupling capacitors, and power management circuits.
  • Metal Shielding with EMI Tabs: Perimeter spring-finger grounding tabs around the metal shell establish multi-point contact with the equipment front panel or bezel cutout, supporting the system-level shielding and grounding architecture.

10/100BASE-T Signal Transmission and 4-Core Magnetics per Port

Fast Ethernet (100BASE-TX) communication utilizes two differential pairs per port: one dedicated to transmit (TX) and one to receive (RX). The LPJ26404AFNL incorporates an internal 4-core magnetic structure per channel (8 cores total across the 1x2 assembly) with a 1CT:1CT turns ratio (T, C configuration), providing galvanic isolation and common-mode filtering for both ports.

Specified for operation across -40°C to +85°C, the magnetic core materials maintain stable open-circuit inductance (OCL) and baseline wander compensation across harsh thermal excursions. Because the connector is engineered specifically for non-PoE architectures, the internal magnetic layout is dedicated to differential data transmission without allocating space or thermal margins to high-current DC power paths.

Hardware designers should evaluate the MagJack in conjunction with the host Fast Ethernet PHY transceivers, differential trace layout, ground plane design, and enclosure EMC strategy to ensure proper physical-layer performance.

Mechanical and PCB Design Considerations

Physical mounting orientation and board anchoring are key considerations when integrating dual-port through-hole RJ45 jacks:

1. 8P8C Interface per Port and PCB Termination

Each port features a standard 8-contact RJ45 mating face alongside through-hole termination pins on the PCB side. The terminal pins accommodate differential data lines, common-mode termination references, and integrated LED connections.

Engineers should consult the official mechanical drawing to verify pin pitch, drill diameters, and trace clearance requirements before releasing board artwork.

2. T-Post Mechanical Retention

Molded T-Post locating pegs anchor the dual-port connector body securely to the FR4 PCB. They assist in absorbing lateral and axial forces during simultaneous cable insertion and extraction, supporting solder-joint reliability under mechanical stress.

3. Status LED Indicators

The connector incorporates Green LEDs on both the left and right positions of each port for visual link and network activity indication. Current-limiting resistors and drive circuits must be implemented on the host PCB in accordance with PHY specifications and LED electrical ratings.

Architecture Comparison: Dual-Port 1x2 MagJack vs. Alternative Implementations

Evaluation Metric LPJ26404AFNL
1x2 Tab-Down 10/100 MagJack
2 x Single-Port
10/100 MagJacks
Stacked 2x1
10/100 MagJack
Port Configuration 1x2 Horizontal Ganged 2 x Discrete Single Ports Stacked 2x1 (Vertical 2-Port)
Vertical Height Profile Low-Profile (~13.61 mm) Low-Profile (~13.50 mm) Tall (~25.50 mm)
Operating Temperature -40°C to +85°C (Industrial) Model-dependent Model-dependent
Package Length (Depth) Compact (21.36 mm / 0.841 in) Typically 25.25 mm – 32.50 mm Typically 28.50 mm
Latch Orientation Tab-Down (Bottom Latch) Tab-Up or Tab-Down Dual Latch (Both)
Assembly Placement Single placement cycle Two individual placements required Single placement cycle
Primary Advantage Low vertical profile with compact depth for dual I/O Flexible port spacing Saves horizontal board-edge space

Application Considerations for LPJ26404AFNL

Target Application Profile Potential Plating Option Primary Engineering Consideration
Network Interface Cards & Server Adapters Gold 15µ" / 30µ" Low-profile 13.61 mm height fits PCIe bracket envelopes; dual-port consolidation reduces component count.
Optical Network Terminals (ONT) & Gateways Gold 15µ" -40°C to +85°C operating range, compact 21.36 mm length, perimeter EMI tabs for enclosure bonding.
Switching Power Supply Management Boards Gold 6µ" / 15µ" Stable physical-layer isolation, T-Post mechanical PCB anchoring against vibration.
Industrial Box PCs & Security Webcams Gold 15µ" / 30µ" Dual-port 10/100BASE-T connectivity; Tab-Down latch facilitates maintenance access in tight enclosures.

Engineering Verification Checklist

Before releasing a PCB layout or finalizing a bill of materials (BOM) using the LPJ26404AFNL, hardware engineers should confirm the following design parameters against the official product drawing:

  • Package Dimensions & Clearances: Verify the 13.61 mm height, 21.36 mm length, and 31.18 mm width against internal enclosure clearances.
  • Pinout and Schematic Alignment: Verify the terminal numbering, center-tap connections, and differential-pair assignments against the official product drawing and selected PHY reference design.
  • Tab-Down Latch Clearance: Ensure adequate clearance below the front-panel cutout for RJ45 plug latch disengagement during maintenance.
  • PCB Land Pattern: Check through-hole pad diameters, T-Post hole locations, and shield ground pin drill sizes on the manufacturer's footprint drawing.
  • EMI Tab Contact Geometry: Confirm front-panel cutout dimensions ensure continuous mechanical contact with the shield EMI spring tabs.
  • LED Drive Circuitry: Implement suitable series current-limiting resistors and drive circuits on the host PCB matched to the selected PHY.
  • Thermal Operating Environment: Confirm the operating environment remains within the specified -40°C to +85°C industrial temperature range.

Frequently Asked Questions

Is the LINK-PP LPJ26404AFNL a compatible alternative to the Pulse JX80-0019NL?

The LPJ26404AFNL is designed as a compatible alternative to the Pulse JX80-0019NL with a dual-port (1x2) 10/100BASE-T MagJack configuration, Tab-Down latch, compact 21.36 mm package length, 8P8C pinout per port, Green/Green LEDs, T-Post PCB retention, metal shield with EMI tabs, and an industrial operating temperature range of -40°C to +85°C. Engineers should verify the mechanical drawing, pin assignments, and PCB land pattern before production use.

What is the mechanical advantage of a 1x2 horizontal ganged connector?

A 1x2 horizontal ganged connector integrates two ports into a single rigid 31.18 mm housing, maintaining precise port pitch and simplifying front-panel cutout alignment. It also reduces component placement cycles compared to mounting two separate single-port connectors.

What is the design benefit of the Tab-Down latch and 21.36 mm package length?

The Tab-Down latch places the release tab on the bottom of the connector, facilitating plug removal when mounted near the upper edge of an enclosure or under a display bezel. The compact 21.36 mm length reduces board depth requirements, freeing space behind the connector for host-board routing.

What is the significance of the -40°C to +85°C operating temperature rating?

The -40°C to +85°C rating indicates that the internal magnetics, winding insulation, and housing materials maintain required electrical isolation, baseline wander compensation, and signal coupling across industrial temperature extremes, making the connector suitable for outdoor cameras, switching power controllers, and harsh factory environments.

Is the LPJ26404AFNL suitable for Power over Ethernet (PoE)?

No. The LPJ26404AFNL is specified as a Non-PoE connector for data-only Fast Ethernet interfaces. For systems requiring PoE power delivery, a MagJack with dedicated PoE-rated magnetics and DC current paths should be selected.

What contact plating options are available for the LPJ26404AFNL?

The LPJ26404AFNL is available with 6 micro-inch, 15 micro-inch, or 30 micro-inch gold plating options at the contact mating area. Selection should be evaluated based on the expected mating cycles, operating environment, and application durability requirements.

Download