HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open

Product Categories


Costa-Rica LQD-CW400-LR4C 400GBASE-LR4 QSFP-DD 1310nm 10km DOM Duplex LC SMF Optical Transceiver Modules

400G QSFP-DD LR4 optical transceiver up to 10km SMF, PAM4 1310nm, IEEE 802.3bs compliant. Compatible with Cisco, Arista, NVIDIA, LINK-PP LQD-CW400-LR4C.
  • Compatible Brands: LINK-PP
  • Form Factor: QSFP-DD
  • Data Rate: 400G
  • Distance: ≤10km
  • Connector: Duplex LC
  • Model: LR4
  • Wavelength: 1310nm
  • P/N: LQD-CW400-LR4C
  • Manufacture: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: LQD-CW400-LR4C

Product Description

Product Specifications

The following specifications summarize the electrical, optical, and mechanical characteristics of the LQD-CW400-LR4C 400G QSFP-DD LR4 optical transceiver. These parameters define its performance under IEEE 802.3bs compliant 400G Ethernet environments.

LINK-PP Part Number: LQD-CW400-LR4C Vendor Name LINK-PP
Max Data Rate 400Gbps Form Factor QSFP-DD
Wavelength 1310nm Max Cable Distance 10km
Connector Duplex LC (UPC) Media SMF
Transmitter Type CWDM EML Receiver Type PIN
Max power consumption 9.5W Protocols IEEE 802.3bs, QSFP-DD MSA
DDM/DOM Supported Case Temperature range  0°C to +70°C
Warranty 5 Years    

Product Overview

LINK-PP LQD-CW400-LR4C is a 400G QSFP-DD optical transceiver designed for long-reach data center and enterprise backbone interconnects up to 10km over single-mode fiber (SMF).It follows a PAM4-based 400GBASE-LR4 architecture and is compliant with IEEE 802.3bs and QSFP-DD MSA standards.This module is commonly used as a Cisco QDD-400G-LR4 compatible solution for 400G Ethernet data center deployments requiring 10km single-mode fiber connectivity.

This module converts high-speed electrical signals into four parallel 106.25Gbps optical lanes at 1310nm wavelength, enabling stable 400G transmission for leaf-spine and metro data center architectures where low latency and high link stability are required.

Compared with short-reach 400G DR4 or SR8 solutions, LR4C is optimized for longer distance transmission over duplex LC interfaces, eliminating the need for MPO-12 parallel fiber cabling and simplifying fiber infrastructure in extended deployments.

Key Features

  • 400G PAM4 optical transmission based on QSFP-DD form factor
  • Compliant with IEEE 802.3bs and QSFP-DD MSA standards
  • Supports up to 10km transmission over single-mode fiber (SMF)
  • Duplex LC interface for simplified fiber infrastructure
  • Integrated DDM/DOM real-time monitoring for optical diagnostics
  • Low power consumption design (~9.5W typical)
  • High-performance EML transmitter for stable long-reach signaling

Typical Applications

  • Data center interconnect (DCI)
  • Metro edge and regional backbone networks
  • Cloud service provider infrastructure
  • Enterprise campus core networks
  • High-capacity storage and replication networks
  • AI and HPC cluster aggregation layers

400G LR4 Architecture Overview

The LQD-CW400-LR4C is based on a 4-lane WDM architecture, where each lane operates at 106.25Gbps using PAM4 modulation. The electrical interface consists of 8x53.125Gbps channels inside the host system, which are retimed and mapped into optical lanes for transmission.

This architecture reduces fiber complexity compared to parallel 400G DR4 solutions, making LR4 ideal for longer-distance duplex LC deployments in structured cabling environments.

Form Factor and Interface

  • Form Factor: QSFP-DD (Quad Small Form-factor Pluggable Double Density)
  • Connector: Duplex LC (UPC)
  • Fiber Type: Single-Mode Fiber (SMF)
  • Wavelength: 1310nm LAN-WDM grid
  • Modulation: PAM4

Compatibility and Interoperability

The module is designed for interoperability with major 400G Ethernet switch platforms including Cisco, Arista, Juniper, NVIDIA, Dell, and HPE systems, with EEPROM customization available for vendor-specific compatibility requirements.

Each unit undergoes interoperability validation, including optical eye diagram testing, bit error rate (BER) verification, and link stability validation under full load conditions.

Frequently Asked Questions

The following FAQs provide technical clarification for the LINK-PP LQD-CW400-LR4C 400G QSFP-DD LR4 optical transceiver, including compatibility, transmission distance, fiber requirements, and deployment considerations. These answers are intended to support system design decisions, interoperability planning, and 400G network deployment in data center and telecom environments.

For 400G Ethernet networks, LR4 modules are commonly selected for long-reach applications up to 10km over single-mode fiber, and are often evaluated alongside DR4 and FR4 solutions during architecture design and procurement.

What is 400G QSFP-DD LR4 used for?

400G QSFP-DD LR4 is used for long-reach 400GbE connectivity in data centers and data center interconnect (DCI) applications. It supports transmission distances up to 10km over single-mode fiber (SMF) using duplex LC connectors.

What is the architecture of a 400G LR4 optical module?

400G LR4 uses a four-wavelength WDM architecture over single-mode fiber, combined with PAM4 modulation, to transmit 400G optical signals over four optical lanes in the 1310nm wavelength window.

What fiber type is required for 400G LR4?

400G LR4 requires single-mode fiber (SMF) with duplex LC connectors, commonly used for long-reach optical transmission in data center and backbone networks.

Does 400G LR4 use PAM4 and FEC?

400G LR4 uses PAM4 modulation. Forward Error Correction (FEC) is typically applied at the system level to improve link reliability in 400G Ethernet deployments.

What is the maximum transmission distance of 400G LR4?

The typical transmission distance is up to 10km over single-mode fiber, depending on optical link budget and system design.

What is the power consumption of 400G LR4?

The typical power consumption is around 9.5W under normal operating conditions.

What is the difference between 400G LR4 and DR4?

DR4 uses parallel MPO-12 multimode or single-mode short-reach optics for up to 500m, while LR4 uses WDM over duplex LC fiber for longer reach up to 10km.

When should I choose 400G LR4 instead of FR4 or SR8?

LR4 is typically used for long-reach links up to 10km. FR4 is used for intermediate distances around 2km, while SR8 is designed for short-reach, high-density multimode fiber connections.

What are the deployment requirements for 400G LR4?

Deployment requires QSFP-DD 400G-capable switch ports, single-mode fiber infrastructure, and proper optical link budget planning for stable operation.

Does 400G LR4 support digital diagnostic monitoring (DDM)?

Yes, it supports digital diagnostic monitoring (DDM/DOM), including real-time parameters such as optical power, temperature, voltage, and laser bias current.

Download

Product Drawing