HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open

Product Categories


Costa-Rica X Multiple XTFZ-M-3007A-MOA Compatible LINK-PP LP1164NL 10/100 Base-T Quad Port SMD 40PIN Ethernet LAN Magnetic Transformer

LINK-PP LP1164NL: Quad-port 10/100BASE-T LAN magnetics, SMD 40-pin open frame. Compatible with X Multiple XTFZ-M-3007A-MOA for industrial PCs and automation.
  • Compatible Brands: X Multiple
  • Data Rate: 10 BASE-T,100 BASE-TX
  • Mounting Type: Surface Mount
  • Turns Ratio TX: 1CT:1CT
  • Temperature: 0℃ TO +70℃
  • Application -LAN: ETHERNET(Non PoE)
  • P/N: LP1164NL
  • Manufacture: LINK-PP
  • Compatible Brand: X Multiple
  • Compatible P/N: XTFZ-M-3007A-MOA

Product Description

Product Specifications

LINK-PP Part Number LP1164NL X Multiple Equivalent XTFZ-M-3007A-MOA
Transformer Type LAN Magnetic Transformer Part Status Active
Number of Ports Quad Port (4-Port) Application-LAN Ethernet (Non-PoE)
Speed 10/100BASE-T Mounting Type Surface Mount (SMD)
PIN Count 40 Pins Construction Open Frame
Turns Ratio (RX/TX) 1CT:1CT Configuration (RX/TX) T, C, S
AutoMDX Yes Cores per Port 16
Operating Temperature 0°C to +70°C Packaging Tape & Reel
Package Length (Inches/mm) 1.125 / 28.58 Package Width (Inches/mm) 0.630 / 16.00
Package Height (Inches/mm) 0.260 / 6.60 Standard Compliance IEEE 802.3, UL, RoHS, REACH

Quad-Port 10/100BASE-T Fast Ethernet Discrete LAN Magnetics Module (SMD 40-Pin)

The LINK-PP LP1164NL is a high-density, 4-port 10/100BASE-T discrete Ethernet magnetics module packaged in a compact 40-pin surface-mount (SMD) open-frame format. For hardware design engineers, it delivers four fully independent Fast Ethernet channels with a symmetrical 1CT:1CT turns ratio, integrated common-mode chokes, T, C, S configuration, and full AutoMDX compliance meeting IEEE 802.3 electrical isolation standards. For procurement and supply chain teams, the LP1164NL serves as a direct cross-reference and drop-in alternative to the X Multiple XTFZ-M-3007A-MOA, supplied in tape-and-reel packaging to facilitate automated SMT manufacturing while mitigating single-source procurement risks. For OEM system integrators, the consolidated quad-port architecture offers a low 6.60 mm vertical profile, freeing up vital board-edge and internal enclosure space across industrial computers, automation controllers, gaming platforms, and multi-channel communication equipment.

Operating across a commercial temperature range of 0°C to +70°C, the LP1164NL is engineered for high-density multi-port designs that demand signal isolation and EMI suppression without being constrained by fixed RJ45 connector geometries. Hardware engineering teams should verify the 40-pin SMD footprint, differential routing rules, PHY transceiver application notes, and PCB land patterns against official engineering drawings before releasing designs for volume production.

Channel Architecture: Quad-Port (4-Channel) 10/100BASE-T
Package Type: 40-Pin SMD (Open Frame)
Cross Reference: X Multiple XTFZ-M-3007A-MOA
Turns Ratio: 1CT:1CT (TX & RX)
Manufacturing Format: Tape & Reel for Automated SMT
Standards Adherence: IEEE 802.3, UL, RoHS, REACH

Compatibility and Design Positioning

The LINK-PP LP1164NL is positioned as a pin-compatible, electrically matched alternative to the X Multiple XTFZ-M-3007A-MOA quad-port LAN magnetic transformer. Both components share a 40-pin surface-mount package layout, 1CT:1CT turns ratio across transmit and receive channels, open-frame mechanical construction, and non-PoE 10/100BASE-T electrical characteristics. Hardware and sourcing teams evaluating second-source qualification or BOM consolidation can integrate the LP1164NL with minimal layout deviation. Engineering teams should cross-reference the pin assignments, PCB pad geometries, reflow soldering limits, and PHY-side termination guidelines with the official LINK-PP mechanical drawing to confirm drop-in compatibility.

Quad-Port Discrete Magnetics and High-Density Multi-Channel Routing

Integrating four Ethernet magnetic circuits into a single SMD package provides key system-level advantages over individual single-port discrete solutions or rigid integrated connector modules:

  • SMT Placement and BOM Simplification: Replacing four discrete single-port transformers with a single 40-pin LP1164NL module reduces pick-and-place machine cycles by 75%, simplifies bill-of-materials management, and improves production yield in high-volume assembly lines.
  • Connector Selection Flexibility: Because the magnetics are isolated from the physical I/O interface, designers have complete freedom to select custom front-panel connectors, such as multi-port unshielded/shielded RJ45 blocks, ruggedized M12 circular connectors, optical transceivers, or proprietary multi-pin headers.
  • Board Space and Trace Matching: Consolidating 4 ports within a 28.58 mm × 16.00 mm boundary provides uniform electrical distance to multi-port Ethernet PHYs or Ethernet switch ICs, facilitating balanced differential pair lengths and symmetrical EMI performance.
  • Low-Profile Mechanical Clearance: At just 6.60 mm in height, the LP1164NL easily satisfies the strict vertical clearance constraints of low-profile add-in cards, 1U rack-mount chassis, modular IPC sub-assemblies, and mezzanine modules.

Internal Magnetics Architecture, 1CT:1CT Turns Ratio, and Signal Integrity

Each of the four ports in the LP1164NL features an internal magnetic circuit designed for standard 10/100BASE-T Ethernet signaling. The module utilizes a 1CT:1CT turns ratio on both the transmit (TX) and receive (RX) stages, matching the vast majority of current-mode and voltage-mode Ethernet PHY transceivers available on the market.

The module incorporates an integrated common-mode choke (CMC) and autotransformer structure configured in a T, C, S topology to suppress common-mode EMI noise generated by high-speed switching circuits while maintaining high differential signal integrity. The module provides full AutoMDX support, allowing automated crossover detection without signal degradation. Galvanic isolation compliant with IEEE 802.3 protects sensitive host silicon from cable-induced transients, ground potential differences, and common-mode noise.

Mechanical Envelope and SMT Manufacturing Considerations

When implementing 40-pin quad-port surface-mount discrete magnetics, layout and manufacturing engineers should account for the following structural considerations:

1. Package Dimensions and Vertical Clearance

The LP1164NL measures 28.58 mm (1.125 inches) in length, 16.00 mm (0.630 inches) in width, and 6.60 mm (0.260 inches) in maximum assembled height. Its low-profile profile allows direct placement beneath mezzanine boards or within slim industrial enclosures.

2. 40-Pin SMD Land Pattern and Coplanarity

The component features 40 gull-wing SMD leads arranged across two parallel sides. Proper solder stencil design and accurate solder pad dimensions are essential to ensure uniform solder fillet formation, maintain coplanarity across all 40 leads, and avoid bridging during reflow.

3. Open-Frame Construction and Thermal Soldering Profile

The open-frame construction minimizes component weight and allows uniform heat penetration during convection reflow. SMT process engineers should review standard lead-free SAC305 reflow profiles, adhering to the peak temperature and time-above-liquidus limits specified in the component datasheet.

4. Tape & Reel Packaging for Automated Pick-and-Place

Supplied in standard Tape & Reel packaging, the LP1164NL is optimized for automated pick-and-place equipment with standard vacuum nozzles. Proper reel storage and moisture handling in accordance with MSL classifications help prevent solderability issues during production runs.

Architecture Comparison: Quad-Port Discrete Transformer vs. Alternative Implementations

Evaluation Metric LP1164NL
Quad-Port SMD Transformer
4× Single-Port Discrete
SMD Transformers
Quad-Port Integrated
RJ45 MagJack (1×4)
Channel Count 4 Channels (Consolidated) 4 Channels (1 Port per chip) 4 Channels (Integrated with Jack)
SMD Placement Count 1 Pick-and-Place Placement 4 Individual Placements 1 Through-Hole / Hybrid Placement
Physical I/O Freedom High (Custom RJ45, M12, or Headers) High (Custom RJ45, M12, or Headers) None (Fixed RJ45 Port Geometry)
Vertical Component Height 6.60 mm (Low Profile) ~5.50 mm – 6.50 mm ~13.50 mm – 25.40 mm
PCB Layout Flexibility Centralized multi-channel routing Distributed per-port routing Rigid board-edge placement required
Primary Design Focus High-density multi-port discrete routing Modular or single-channel designs Standard front-panel RJ45 consolidation

Application Considerations for LP1164NL

Target Application Profile Primary Engineering Consideration
Industrial PCs (IPCs) & Multi-Port NICs Low 6.60 mm height enables space-efficient layouts on multi-port PCI Express add-on cards and compact embedded motherboards.
Factory Automation & PLC Controllers Consolidates four 10/100 channels with 1CT:1CT turns ratio for direct interface to multi-channel industrial Ethernet switch controllers.
Machine Vision & Robotics Controllers Allows pairing discrete magnetics with ruggedized M12 or IP67 connectors on specialized machine interfaces.
Gaming Terminals & Dedicated Hardware Provides reliable IEEE 802.3 compliant signal isolation and automated SMT assembly in cost-sensitive commercial hardware.

Engineering Verification Checklist

Before finalizing PCB design or committing to volume procurement with the LP1164NL, hardware engineers should confirm the following technical factors:

  • SMD Footprint and Pad Geometry: Verify 40-pin pad dimensions, lead pitch, and solder mask expansion against the LINK-PP LP1164NL footprint drawing.
  • PHY Interface Compatibility: Confirm that the 1CT:1CT turns ratio (TX and RX) aligns with the selected 10/100BASE-T transceiver's reference design guidelines.
  • Keep-Out Area Beneath Magnetics: Ensure that no high-speed copper traces, ground planes, or power planes run directly under the open-frame magnetic module on the top PCB layer to prevent capacitive coupling and EMI degradation.
  • Front-End ESD and Termination Circuitry: Implement Bob Smith common-mode termination and transient voltage suppression (TVS) diodes between the transformer's cable side and the external connector.
  • Reflow Profile Compliance: Verify that the assembly facility's convection reflow thermal profile adheres to standard lead-free soldering thresholds for 40-pin open-frame packages.
  • Thermal Operating Environment: Ensure that the operating ambient temperature remains within the specified 0°C to +70°C commercial operating range.

Frequently Asked Questions

What are the primary specifications of the LINK-PP LP1164NL?

The LINK-PP LP1164NL is a quad-port (4-channel) 10/100BASE-T discrete LAN magnetic transformer. It features a 40-pin surface-mount (SMD) open-frame construction, 1CT:1CT turns ratio for both transmit and receive, integrated common-mode chokes, AutoMDX support, Tape & Reel packaging, and an operating temperature range of 0°C to +70°C.

Is the LINK-PP LP1164NL compatible with the X Multiple XTFZ-M-3007A-MOA?

Yes. The LP1164NL is designed as an electrically and mechanically compatible alternative to the X Multiple XTFZ-M-3007A-MOA. Both devices feature a 40-pin SMD package, identical 1CT:1CT turns ratios, open-frame construction, and quad-port 10/100BASE-T non-PoE operation. Engineers should verify land patterns and pin mapping against official drawings before mass production.

Why choose a discrete transformer module like the LP1164NL instead of an integrated RJ45 MagJack?

Discrete LAN transformers provide complete independence between magnetics and physical I/O connectors. This allows designers to use ruggedized connectors (such as M12 or circular IP67 connectors), custom backplanes, or low-profile multi-port RJ45 jacks. Additionally, at only 6.60 mm high, discrete SMD transformers fit into ultra-low-profile enclosures where standard RJ45 MagJacks would be physically too tall.

What are the design advantages of an open-frame quad-port transformer?

An open-frame quad-port transformer combines four complete Ethernet magnetic circuits into a single SMD component, reducing SMT pick-and-place steps from four down to one. The open-frame construction reduces overall package weight, promotes efficient convection heat transfer during reflow soldering, and simplifies visual inspection of solder joints.

Does the LP1164NL support Power over Ethernet (PoE)?

No. The LP1164NL is specified for non-PoE Ethernet applications. Its internal magnetic chokes and windings are optimized for 10/100BASE-T differential data communication and galvanic isolation, and are not rated to carry DC power currents associated with IEEE 802.3af/at/bt PoE standards.

What PCB routing guidelines apply beneath the LP1164NL module?

A strict keep-out zone is recommended directly underneath the LP1164NL footprint on the top PCB layer. No high-speed digital traces, ground planes, or power planes should run beneath the open-frame magnetics to prevent capacitive noise coupling and ensure maximum dielectric isolation between the PHY-side and cable-side circuits.

Download

Product Drawing