Product Categories
Costa-Rica Pulse H4001CG Compatible LINK-PP LP1164NL 10/100 Base-T Quad Port SMD 40PIN Telecom Ethernet Lan Magnetics
- Compatible Brands: Pulse
- Data Rate: 10 BASE-T,100 BASE-TX
- Mounting Type: Surface Mount
- Turns Ratio TX: 1CT:1CT
- Temperature: 0℃ TO +70℃
- Application -LAN: ETHERNET(Non PoE)
- P/N: LP1164NL
- Manufacture: LINK-PP
- Compatible Brand: Pulse
- Compatible P/N: H4001CG
Category:
Product Description
Product Specifications
| LINK-PP Part Number | LP1164NL | Pulse Part Number | H4001CG |
| Part Status | Active | Transformer Type | Lan Transformer |
| Construction | OPEN FRAME | Application-Lan | Ethernet(Non-PoE) |
| Number of Ports | Quad Port | Speed | 10/100 Base-T |
| Package | Tape & Reel | Cores per Port | 16 |
| AutomDX | Yes | Comment | SAME AS NL VERSION |
| PIN Number | 40 | Mounting Type | Surface Mount |
| Package Height (Inches/mm) | 0.260/6.60 | Package Length (Inches/mm) | 1.125/28.58 |
| Package Width (Inches/mm) | 0.630/16.00 | Temperature | 0℃ TO +70℃ |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C,S |
Product Engineering Overview
LINK-PP LP1164NL is a quad-port 10/100BASE-T LAN transformer in a 40-pin surface-mount package. The existing product table specifies Non-PoE Ethernet and a 1CT:1CT RX/TX turns ratio.
The listed package envelope is 28.58 × 16.00 × 6.60 mm (length × width × height), and the component temperature range is 0°C to +70°C. When selecting the device, match the complete transformer pinout and center-tap arrangement to the host PHY and board layout.
PCB and Electrical Interface
A 1CT:1CT turns ratio alone does not establish interchangeability: compare winding connections, terminal assignments and the PCB land pattern with the applicable schematic and mechanical drawing. Evaluate the assembled board for the host interface and operating conditions.
Selection and Qualification
The existing product record lists Pulse H4001CG as a cross-reference. Check both drawings, pin assignments and electrical ratings before qualifying it as an alternative. For sample evaluation, use the full part number and applicable revision; confirm packaging and production requirements with the supplier.
Frequently Asked Questions
What Ethernet interface and package are listed for LP1164NL?
The existing record identifies a 10/100BASE-T quad-port transformer with 40 surface-mount pins.
Does LP1164NL support power over Ethernet?
The product table specifies Non-PoE. Select a solution rated for the intended PoE application when Ethernet power is required.
Can another 1CT:1CT transformer use the same PCB footprint?
Not necessarily. The ratio does not define terminal mapping, electrical ratings or land pattern; compare the relevant drawings.
What component temperature range is listed?
The record specifies 0°C to +70°C; the finished equipment requires its own environmental assessment.
Download
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications



























