Product Categories
Costa-Rica LP6017ANL 5G Base-T Single Port SMD 24 Pin Low Profile Lan Transformer Magnetic Modules
- Compatible Brands: LINK-PP
- Data Rate: 5G BASE-T
- Mounting Type: Surface Mount
- Turns Ratio TX: 1CT:1CT
- Temperature: -40℃ TO +85°C
- Application -LAN: ETHERNET(Non PoE)
- P/N: LP6017ANL
- Manufacture: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: LP6017ANL
Category:
Product Description
Product Specifications
| LINK-PP Part Number | LP6017ANL | Transformer Type | Lan Transformer |
| Part Status | Active | Turns Ratio - Primary: Secondary | 1:1 Transmitter, 1:1 Receiver |
| Construction | OPEN FRAME | Application-Lan | Ethernet(NoN PoE) |
| Number of Ports | Single Port | Speed | 5G Base-T |
| Package | Tape & Reel | Cores per Port | 8 |
| AutomDX | Yes | Comment | SAME AS NL VERSION |
| PIN Number | 24 | Mounting Type | Surface Mount |
| Package Height (Inches/mm) | 0.154/3.9 | Package Length (Inches/mm) | 0.669/17.00 |
| Package Width (Inches/mm) | 0.486/12.35 | Temperature | -40℃ TO +85℃ |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C,S |
LINK-PP LP6017ANL Technical Overview
The LINK-PP LP6017ANL is a single-port 24-pin surface-mount (SMD/SMT) 5GBASE-T Multi-Gigabit Ethernet LAN magnetic transformer module featuring an ultra-low-profile package height of 3.90mm (0.154 in). Engineered with an 8-core magnetic assembly (1CT:1CT turns ratio) in an open-frame construction, it is delivered in Tape & Reel packaging for automated SMT pick-and-place assembly across an extended industrial operating temperature range of -40°C to +85°C.
- 5GBASE-T Multi-Gigabit Performance: Integrates an 8-core magnetic matrix across 4 differential pairs to support 5 Gbps Ethernet communications per IEEE 802.3bz standards over Cat6/Cat6a wiring.
- Ultra-Low-Profile 3.90mm Package Height: Slim 0.154-inch height profile maximizes vertical clearance in ultra-thin industrial PCs, Wi-Fi access points, and compact networking hardware.
- Industrial Operating Temperature (-40°C to +85°C): Fully rated for harsh environmental conditions, unconditioned outdoor enclosures, and industrial control cabinets.
- 24-Pin SMT Open-Frame Construction: Standard gull-wing lead design in Tape & Reel format for automated high-volume SMT reflow soldering.
Key Design Benefits
- 5 Gbps Bandwidth Upgrade: Supports 5GBASE-T Multi-Gigabit data rates, allowing system designers to upgrade network throughput up to 5 Gbps without moving to optical interfaces.
- Ultra-Thin Vertical Clearance Optimization: The 3.90mm (0.154 in) height profile allows installation in space-constrained embedded mainboards, mezzanine cards, and slim wireless routers.
- Extended Industrial Thermal Range: Operates reliably across -40°C to +85°C, making it suitable for outdoor wireless access points, ruggedized IPCs, and industrial gateways.
- Automated Pick-and-Place Efficiency: Open-frame 24-pin gull-wing lead design packaged in Tape & Reel streamlines high-speed SMT assembly and reflow soldering.
- Supply Chain Continuity: Offers hardware engineering and procurement teams an industrial-grade 5GBASE-T SMT transformer option for secondary sourcing.
Integrated Magnetics & Electrical Architecture
The LP6017ANL integrates 5GBASE-T Multi-Gigabit magnetics into an ultra-low-profile SMT module, reducing the need for long differential trace runs to PHY transceivers on the motherboard.
8-Core 5GBASE-T Transformer Matrix
The integrated magnetic assembly utilizes an 8-core topology across all 4 differential pairs with a 1CT:1CT turns ratio. This structure provides galvanic isolation between PHY transceivers and network media while suppressing common-mode noise across high-frequency 5GBASE-T lines up to 200 MHz.
Differential Signal Balance
Center-tapped primary and secondary windings maintain balanced differential signaling across all four transmit/receive channels per IEEE 802.3bz specifications, minimizing differential-to-common-mode noise conversion.
Mechanical Specifications & SMT Layout
The LP6017ANL features ultra-compact package dimensions of 3.90mm (H) x 12.35mm (W) x 17.00mm (L) [0.154 x 0.486 x 0.669 in]. The 24-pin SMT Gull-Wing lead layout is designed for Tape & Reel automated pick-and-place assembly and standard Pb-free reflow soldering profiles.
Target Applications
- Wi-Fi 6 / 6E / 7 Wireless Access Points: High-speed 5 Gbps Ethernet LAN magnetic isolation for enterprise wireless access points and outdoor radios.
- Industrial PCs & Multi-Gigabit Gateways: Industrial-grade (-40°C to +85°C) 24-pin SMT 5G transformer for embedded automation mainboards and edge computing hardware.
- Network Switches & Network Interface Cards (NICs): High-throughput 5GBASE-T signal isolation for multi-gigabit switch ports and PCIe server adapters.
LINK-PP LP6017ANL Design Verification Checklist
When evaluating the LINK-PP LP6017ANL for new designs or secondary sourcing qualification, hardware engineers should verify the following parameters against their system specification:
- Schematic & Pinout Alignment: Confirm that your 24-pin SMT 5GBASE-T LAN layout matches the 1CT:1CT primary/secondary turns ratio and center-tap configuration.
- Ultra-Low Profile Height Clearance: Verify that the 3.90mm (0.154 in) package height fits your PCB vertical clearance requirements.
- Thermal Class Verification: Confirm that the -40°C to +85°C industrial temperature rating meets or exceeds your system specification.
- Non-PoE Requirement: Confirm that your LAN port design utilizes non-PoE 5GBASE-T signal magnetics.
Frequently Asked Questions
What are the primary mechanical and electrical specs of the LINK-PP LP6017ANL?
The LP6017ANL is a single-port 24-pin surface-mount (SMT) 5GBASE-T Multi-Gigabit Ethernet LAN magnetic transformer module featuring an 8-core magnetic assembly (1CT:1CT), open-frame construction, Tape & Reel packaging, an ultra-low-profile 3.90mm package height, and an extended industrial operating temperature rating of -40°C to +85°C.
What is the advantage of 5GBASE-T speed support on the LP6017ANL?
5GBASE-T supports data rates up to 5 Gbps over standard Cat6 and Cat6a cabling per IEEE 802.3bz specifications, providing 5 times the bandwidth of standard 1G Ethernet for high-throughput Wi-Fi access points and industrial PCs without requiring fiber-optic cabling.
What engineering assets are available for LP6017ANL PCB design-in?
LINK-PP provides complete design-in support assets, including 3D STEP models for mechanical enclosure clearance, 2D dimensional CAD drawings, PCB footprint land patterns for EDA software (Altium, Cadence, KiCad), and product specification sheets.
How can procurement and engineering teams request samples or a quotation for LINK-PP LP6017ANL?
Procurement and engineering teams can contact LINK-PP to request LP6017ANL evaluation samples for mechanical, electrical, and PCB compatibility verification. After qualification, our technical sales team can provide competitive pricing, production lead-time estimates, MOQ terms, and volume-order support.
Download
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications



























